How To Root & Install TWRP Galaxy S9 / Plus Snapdragon / Exynos

Root S9 Plus Snapdragon
Root S9 Plus Snapdragon

Root S9 Plus Snapdragon – Finally, the Official Twrp Recovery for Galaxy S9 is here for the Exynos variant and the unofficial Twrp Recovery for Galaxy S9 and Galaxy S9 Plus Snapdragon variants. That means you can Root Samsung Galaxy S9 Snapdragon with Twrp Recovery. The root method now supports Exynos and Snapdragon processors via Magisk. Now we will show you how to Root Samsung Galaxy S9 / Plus Exynos and Snapdragon without a PC.

The lack of TWRP recovery, all these while, being the main reason for the Snapdragon Galaxy S9/S9+ unofficial development not flourishing. But, since a developer(travis82) at XDA has finally come up with a reliable build of the TWRP recovery for the devices a day or so ago. We can hope the unofficial sector to see a sudden boost in coming days with the new TWRP acting as the trump-card.

You need to have an unlocked bootloader before flashing the TWRP on Galaxy S9/S9+ Snapdragon variant.

Well, here is a small tutorial on how you can flash the TWRP on the Snapdragon powered Galaxy S9/S9+. Please Read On!

How to Install TWRP on Samsung Galaxy S9

Because the Samsung Galaxy S9 already supports being able to open the bootloader, this smartphone has finally got its own TWRP version. And TWRP here is the official TWRP version.

TWRP itself is a custom recovery for Android that can be used to install/flash ROM, boot image and others into your smartphone, simply you can make any modifications to the Android operating system.

You can also root through this TWRP, so if your smartphone already supports and installed TWRP or other custom recovery, then your smartphone will almost certainly be rooted.

But first, prepare the following materials first to install TWRP Recovery:

In addition, consider also the following:

  • Make sure to use a USB cable that is still functioning properly
  • Samsung Galaxy S9 battery try to be at least 50%
  • This root method will remove the warranty from your smartphone
  • This method can only be used on Galaxy S9 with Exynos chipsets or SM-G960F / FD / N / X models

Extract the root tool file that has been downloaded, then install the Samsung USB Driver. If all of the above has been fulfilled by my friend, then we can continue this tutorial.

1. Enable OEM UnlockingAdvertisement

To enable OEM Unlocking, you must first activate the developer options mode. The trick is very easy, just open “Settings”> “About Phone”. Then tap or press seven times the “Build Number” (Name Formation) until there is a small notification that the developer options are active.

After that, you open Settings again, and scroll down to find Developer options. Open Developers options and look for OEM Unlocking then activate, then search and activate USB Debugging as well.

2. Enter Downloading Mode

Next, you have to go into download mode, first, turn off your Samsung Galaxy S9 cellphone first. Then press and hold the power button + bixby + volume down simultaneously until the download mode screen appears as below.

Then press the volume button up to enter into downloading mode.

3. Flash File TWRP

Plug in your Samsung Galaxy S9 phone, which has entered downloading mode to a computer using a USB cable. Then extract the downloaded Odin file and open Odin by right-clicking then selecting “Run Administrator”.

After Odin opens, wait a moment until Odin recognizes your Samsung Galaxy S9 cellphone. Just look at the left Odin, if there is an inscription “Added” means your Galaxy S9 has been read correctly. But if it’s not there, then chances are that Samsung drivers aren’t installed properly or worse, you forgot to install.

I assume your Galaxy S9 has been detected at Odin. Then click AP and look for the TWRP file that was downloaded earlier. Next in the options tab, make sure that “Auto Reboot” and “Re-partition” are not checked. After that, click Start to begin the process of installing TWRP into the Samsung Galaxy S9.

Wait a minute, if all is successful there will be a “PASS” message in Odin and if it fails there is a “Failed” message. If my friend fails, then most likely the downloaded TWRP file was corrupt, then try downloading the steps as above again.

If the TWRP installation process is complete, you can unplug the USB cable connected to the PC and enter the next tutorial.

How To Root Samsung Galaxy S9 / Plus Snapdargon

I assume that the TWRP installation process has been successful and my friend is still in Download Mode. The next step is to reboot into recovery mode. The trick is to press and hold the volume down + power + bixby.

Shortly after the screen turns full black, release the volume button down and replace pressing the volume button up while still holding the bixby and power buttons. That way, your Samsung Galaxy S9 should successfully enter TWRP Recovery mode.

The first time you enter TWRP, select “Keep Read Only”, don’t give access to modify the system.

Keep Read Only

The next step is to wipe the internal memory by entering the Wipe menu then selecting Data Format. Type yes to start the Samsung Galaxy S9 data wipe process, buddy.

When finished, return to the TWRP menu and select Mount> Enable MTP then connect your Samsung Galaxy S9 to the PC.

Copy the file Noverity, ElementalX and SuperSU / Magisk from the Root Tool file that was downloaded earlier and transfer it to the cellphone. When finished, go directly to the Install menu in TWRP and select the file Noverity that was just copied into your Samsung Galaxy S9.

After finishing Flash Noverity, this time flash the ElementalX and SuperSU / Magisk files in the same way.

How to Root Samsung Galaxy S9 and S9+ Exynos

  1. Download Latest Beta Magisk File And Copy It To Your Sd Card.
  2. Boot Into Twrp Recovery With Volume Up + Bixby Key + Power (Release Power key after logo).
  3. Now Don’t Allow Modifications when asking about modify system, choose “NO”.
  4. Wipe Data from Wipe option type “Yes”, this will delete all data even internal storage.
  5. Go to Reboot and reboot into Recovery after wipe data.
  6. Go To Install.
  7. Install Magisk Beta zip.
  8. Now Reboot Your Device.
  9. Install Oem Unlock Fix Zip before Magisk if No Oem Unlock option in developer Option so first check it before start flashing.

How to Root Samsung Galaxy S9 and S9 Plus Snapdragon

  1. Download “Dm-Verify remove zip” “RMM State Bypass zip” Latest Beta Magisk File And Copy It To Your Sd Card.
  2. Boot Into Twrp Recovery With Volume Up + Bixby Key + Power (Release Power key after logo).
  3. Now Don’t Allow Modifications when asking about modify system, choose “NO”.
  4. Wipe Data from Wipe option type “Yes“, this will delete all data even internal storage.
  5. Go to Reboot and reboot into Recovery after wipe data.
  6. Go to Install option.
  7. Install “Dm-Verify remove zip” then “RMM State Bypass zip” and Beta Magisk zip.
  8. Now Reboot Your Device in normal mode.

Also Read: How To Root Galaxy Note 9 Snapdragon

Setelah semua file di-flash, kemudian kembali ke menu TWRP dan reboot ponsel Samsung Galaxy S9 Anda ke OS dan tunggu sampai ponsel menyala kembali. Di sini saya juga telah memberikan metode root untuk Samsung Galaxy S9 / S9 Plus Snapdragon, sampai jumpa lagi di Masarbi.com.

[saswp-reviews-form]